虚实结合的可穿戴产品适合性检验研究

目的 为了更科学地研究和检验可穿戴产品的适合性,提出一种适合性检验方法,能够精确保留现实环境中的产品佩戴关系,并能将现实与虚拟的适合性检验研究相结合,得到合理的适合性检验结果.方法 以虚拟现实眼镜的适合性检验为例,通过高精度的三维测量技术将现实环境中的人、产品以及人—产品佩戴关系转化为三维虚拟信息,并以人—产品佩戴三维模型为参考基准对齐人和产品的虚拟模型,得到保留现实佩戴关系的人—产品佩戴模型组,再应用偏差分析法得出人—机佩戴区域的可视化适合性结果和统计数据,结合主观评价方法进一步分析产品的适合性.结论 虚实结合的产品适合性检验方法可在虚拟环境中高精度地保留现实环境中的人—产品佩戴关系,并能得到可视化的适合性检验结果,为检验和指导产品的适合性提供依据.     

Influence of accelerated curing on the compressive strength of polymer-modified concrete

In recent building practice, rapid construction is one of the principal requisites. Furthermore, in designing concrete structures, compressive strength is the most significant of all parameters. While 3-d and 7-d compressive strength reflects the strengths at early phases, the ultimate strength is paramount. An effort has been made in this study to develop mathematical models for predicting compressive strength of concrete incorporating ethylene vinyl acetate (EVA) at the later phases. Kolmogorov-Smirnov (KS) goodness-of-fit test was used to examine distribution of the data. The compressive strength of EVA-modified concrete was studied by incorporating various concentrations of EVA as an admixture and by testing at ages of 28, 56, 90, 120, 210, and 365 d. An accelerated compressive strength at 3.5 hours was considered as a reference strength on the basis of which all the specified strengths were predicted by means of linear regression fit. Based on the results of KS goodness-of-fit test, it was concluded that KS test statistics value (D) in each case was lower than the critical value 0.521 for a significance level of 0.05, which demonstrated that the data was normally distributed. Based on the results of compressive strength test, it was concluded that the strength of EVA-modified specimens increased at all ages and the optimum dosage of EVA was achieved at 16% concentration. Furthermore, it was concluded that predicted compressive strength values lies within a 6% difference from the actual strength values for all the mixes, which indicates the practicability of the regression equations. This research work may help in understanding the role of EVA as a viable material in polymer-based cement composites.     

一种大型球铁飞轮冒口工艺改进

铸造车间生产的N330飞轮在加工Ф1025处M20螺栓孔时会出现一处或多处缩松缺陷,造成了该品种废品率的增加,为解决此缩松问题对飞轮进行了跟踪研究,分析并改进了飞轮的造型、冒口补缩和浇注工艺,通过试制验证了工艺改进的合理性。     

浅谈D11T推土机履带链实施翻套检修工艺的必要性

文章从黑岱沟露天煤矿及哈尔乌素露天煤矿D11T推土机履带链的结构入手，对其常见故障的失效形式进行了详细分析和论述，并通过对160条履带链的使用寿命进行采样统计分析，阐述了在5500h进行履带链翻套检修的必要性，以及详细的检修工艺措施。为延长矿用推土机履带链的使用时间提供了可参考的资料，有一定的借鉴价值。     

Analysis and improvement of the influence of sample shape on Pu measurement results

ABSTRACT

The analysis method of Fast Neutron Multiplicity Counting (FNMC) plays an increasingly important role in the measurement of nuclear material properties. Based on the assumption of point model, fast neutron multiplicity measurement equation is derived which can be used to measure the mass of Pu sample. However, the deviation of the simulated measurement of 1 kg Pu sample reaches 16.6% and increases with mass. Because nonpoint source samples of different shapes do not fully satify the hypothesis. To correct this deviation, a set of fast neutron multiplicity counters was built by Geant4 to simulate and study the mass attribute of Pu samples.The cylindrical sources of different shapes and different masses were simulated, the self-multiplication factor and α coefficient were corrected.And the corresponding third-order polynomial fitting equation was obtained, the goodness of fit was greater than 0.970. In the same way, the spherical and spherical shell source samples in the mass range of 0–5 kg were analyzed, the corrected mass deviation of samples was less than 10% in this interval. The results show that the combination of the fast neutron multiplicity counter and parameter correction can accurately measure the sample mass attribute.     

A novel multi-objective optimization method: Input values effect on responses (IVER)

In this study, a novel multi-objective optimization method based on the best effect of unique input (independent variable) values on responses (dependent variables) was proposed. The proposed method was compared with optimization using Derringer & Suich function that is still the most used. The comparison was made using the response values measured in real experiments and available in the literature. The advantages of the proposed method such as not needing the polynomial model aiming to predict the response values, no parameter selection problem, being able to offer optimum range instead of single optimum value, being suitable for use with existing experimental designs and being simple and interpretable were demonstrated as a result of comparison. It was also suggested how the proposed method will be effective according to experimental designs, and application for the users' application was presented.     

Damage propagation and strength prediction of a single-lap interference-fit laminate structure

Frontiers of Mechanical Engineering - Experimental and finite element research was conducted on the bolted interference fit of a single-lap laminated structure to reveal the damage propagation...     

火区综合治理技术研究与应用

改扩建矿井在建设期间,经常要用到矿井部分老巷道,这些老巷道顶帮普遍存在高冒区和破碎煤体松动裂隙区,容易引发火灾。针对这一问题,通过对金地煤业13号煤层火区治理的实践,获得了高冒区和破碎煤体松动裂隙区煤体的氧化、自燃及发生和发展规律,积累了大量火区治理技术和火区管理方面的经验,对其他矿区的火灾治理具有重要的借鉴意义。     

Combined Mutagenesis and Kinetics Characterization of the Bilin‐Binding GAF Domain of the Protein Slr1393 from the Cyanobacterium Synechocystis PCC6803

The gene slr1393 from Synechocystis sp. PCC6803 encodes a protein composed of three GAF domains, a PAS domain, and a histidine kinase domain. GAF3 is the sole domain able to bind phycocyanobilin (PCB) as chromophore and to accomplish photochemistry: switching between a red‐absorbing parental and a green‐absorbing photoproduct state (λ_max=649 and 536 nm, respectively). Conversions in both directions were followed by time‐resolved absorption spectroscopy with the separately expressed GAF3 domain of Slr1393. Global fit analysis of the recorded absorbance changes yielded three lifetimes (3.2 μs, 390 μs, and 1.5 ms) for the red‐to‐green conversion, and 1.2 μs, 340 μs, and 1 ms for the green‐to‐red conversion. In addition to the wild‐type (WT) protein, 24 mutated proteins were studied spectroscopically. The design of these site‐directed mutations was based on sequence alignments with related proteins and by employing the crystal structure of AnPixJg2 (PDB ID: 3W2Z), a Slr1393 orthologous from Anabaena sp. PCC7120. The structure of AnPixJg2 was also used as template for model building, thus confirming the strong structural similarity between the proteins, and for identifying amino acids to target for mutagenesis. Only amino acids in close proximity to the chromophore were exchanged, as these were considered likely to have an impact on the spectral and dynamic properties. Three groups of mutants were found: some showed absorption features similar to the WT protein, a second group showed modified absorbance properties, and the third group had lost the ability to bind the chromophore. The most unexpected result was obtained for the exchange at residue 532 (N532Y). In vivo assembly yielded a red‐absorbing, WT‐like protein. Irradiation, however, not only converted it into the green‐absorbing form, but also produced a 660 nm, further‐red‐shifted absorbance band. This photoproduct was fully reversible to the parental form upon green light irradiation.     

北京洪水峪泥石流形成条件探讨

洪水峪泥石流、沟内崩塌、不稳定斜坡等不良地质现象发育。该沟内煤矸石、沟道物源丰富,上游汇水面积大,沟道纵坡降较大,在强降雨沟道径流冲刷作用下,极易发生揭底起动而形成泥石流灾害。在雨季,支沟常有少量泥沙、块石冲出,阻塞进山道路,淤塞河道,引起原有坝体损毁,威胁居民生命财产安全。通过对以往资料的综合整理,结合现场调查,对洪水峪泥石流形成的诸多条件进行了分析,以期对该区泥石流的防治与预测起到参考作用。